Xiangyang City Hundred Shield Coating Material Co.,Ltd

Selling Leads About Us Certificates Site Map
Product Information
Name: Supply and export large particle wear resistant coatings,anti wear large particle adhesives
Supply Ability: 50000
Minimum Order: 100
Packaging: Two component,10Kg/group,packed in a plastic drum
Brand Name: Baidun
Origin: Xiangyang,China
Model No: BD706
Post Date: 2015-07-03 14:55:50
Expiry Date: 2015-10-01 14:55:49
Price: 9.8
Currency: USD
Price Terms: FOB
Payment Terms: 30% T/T in advance as deposit,the balance T/T before shipment
Unit: kg
Product Description
Supply and export large particle wear resistant coatings,anti wear large particle adhesives:

Packing specification of BD706 large particle wear resistant coatings:
Two component,10Kg/group,packed in a plastic drum


performance feature of BD706 large particle anti wear particle adhesives锛
Wear resistant performance can reach even more than similar international  brand name products.
dark gray paste,large particle,room temperature curing
Excellent in wear & corrosion resistance                   
BD706 Abrasion Resistant coatings and the metal substrate with high bonding strength      
Convenient for construction,without very high technical requirements for constructors   
Suitable for the repairing and protecting of various wear,corrosion working condition
 
product usage of BD706 anti abrasion large particles adhesive:
       It is the high performance wear & corrosion resistant polymerization ceramic material compounded by high performance wear resistant ceramic particles and modified toughening resin.Widely used in the repairing of various wear-out parts and the preparation of wear & corrosion resistant coating on the surface of various machine part which has wear resistant,corrosion resistant requirements,such as the repairing and pre-protecting of large load fine particle erosive wear pump body,impeller,fan shell,pipeline elbow,pipeline spiral conveyor etc.


How to use of BD706 abrasion resistant large particle coatings:
    1.  Surface treatment:Do coarsening treatment on the pending-repair part,grinding with angle grinder or sand blasting etc,the surface after coarsening treatment should be cleaned,the surface after this treatment should be the one coarsening,dry and fresh substrates,should be no greasy dirt and dust.
    2.  Preparation:According to weight ratio 4:1,make A and B two components mix uniformly,and use it up within 30 min.Generally it鈥檚 while construction and configuration.Every time the most configuration quantity is not more than 1.5Kg,too much adhesive is solidified too fast,hasn鈥檛 been used up until the adhesive has partial solidified and can鈥檛 be used.According to the actual temperature,configuration can be properly a little more in winter and proper less in summer.If the temperature is too low,can properly heat up the A component to reduce viscosity for easy to configure.
    3. Coating:The suitable coating thickness of BD706 Abrasion Resistant coatings is 4~8mm,make the mixed-up material be coating on the pending-repair part layer by layer,the first layer should be compacted,make it infiltrate fully with the substrates.Repair the surface to be smooth after the coating is coated in the suitable size,or make BD426 be coating on the coating surface.This material can鈥檛 do machining,should pay attention to controlling the coating thickness during repairing,in order to avoid appearing interference phenomenon in the assembly.
    4.   Curing:Cure for 24 hours at the temperature of 25鈩 before using,(If can heat up to the temperature of 60鈥80鈩 and keep this temperature for 2 hours,in this way,can improve 30% comprehensive performance) If the temperature is low,should heat it up or prolong curing time to promote the curing.General construction in winter,can use iodine tungsten lamp do irradiation heating with 40cm distance from the coating.


Transportation storage of BD706 wear resistant large particle coating:

1.Sealed storage in the cool and dry place.The warranty period is 1 year.

2.Avoid placing it upside down,knocking against and transporting it as a non-dangerous product during transportation.


Those content above is detail information of [Supply and export large particle wear resistant coatings,anti wear large particle adhesives], If you want to get more information about product price,type,function and so on, Please contact us soon.
Other Products from this Supplier